Announcing...
SafeAir1 Firewall Pass-Thru System !!

The SAFER alternative for passing electrical wires through the firewall.


Homebuilders have used lots of methods and materials to pass wires and cables through the firewall - SOME OF THEM ARE VERY UNSAFE !!   In an accident, the sharp stainless steel firewall can cut wire insulation and short battery and alternator cables to airframe ground - CAUSING FIRES WHERE THERE OTHERWISE MIGHT NOT HAVE BEEN A FIRE.
Because of fuel and force fed airflow, engine fires are often extremely hot and quickly melt simple, inappropriate grommets and other "sealing" materials, allowing fire to pass into the cabin. Such solutions are not appropriate for Experimental Aviation.

Stop FIRE at the FIREWALL !!


BUY ON-LINE

Firewall
Pass-Thru
Introduction

Why choose the
SafeAir1
Firewall Pass-Thru System?

Installation
Technical Details
CLICK HERE

Easy and Affordable...

Firewall Pass-Thru
is simple and easy to install in your airplane's firewall.

And, as with every SafeAir1 kit, the Firewall Pass-Thru System comes with everything you need... including clear, concise instructions and images to insure a proper, successful installation.

Most builders will utilize two Firewall Pass-Thru units:

  • One for high current cables (battery, alternator, and Main Buss power) and...
  • A second Pass-Thru for small signal wires such as EGT/CHT and other engine instrumentation and control functions.

ONLY $47

 

Top quality, single piece, spun stainless steel construction has NO sharp edges, corners, or welds that could cut or abrade wire insulation.

Inside diameter is .90 inches. Plenty of capacity for those large battery cables and insulated conductors.

Aviation grade fire resistant materials pack and protect wiring.

SafeAir1 exclusive solution !

"Pyro-Sleeve" is cut to proper length and pre-dipped on both ends.

It is then slipped onto a tube of proper diameter so it retains its shape and won't fray out.

Pyro-Sleeve is ready to use when you get it - no dipping or special solutions required.

Every SafeAir1 Firewall Pass-Thru Kit contains the parts shown above in additon to the high quality Installation Guide, typical of all SafeAir1 Kits.